We are hydraulic metal balers manufacturer in China.
Our Y83T-160 hydraulic scrap metal baler is popularized in the metal processing and recycling station, metal smelting plant with small and medium production. It is configured with the compacting box in size of 1600mm×1000mm×800mm. The finished bale is about 400mm×400mm in size.
Налични са както ръчната манипулация, така и автоматичната работа на PLC. Освен това, тази преса за скрап може да бъде оборудвана с мотора с допълнителна мощност като 30kw или 37kw според производството.
Преса за изсипване на скрап 160 тона за скрап:
Technical Parameters:
Y83 / T-160 Преса за скрап |
|
Модел |
Y83/T-160 |
Cylinder pushing force |
1600KN |
Максимално работно налягане |
25MPa |
Компресирайте размера на стаята |
1600 × 1000 × 800 мм |
Размери на балата (L×W×З) |
400 × 400 мм |
Мотор |
22kW |
Capacity |
5ton/h |
Теоретично време за сух цикъл |
110-те |
Max. thickness can be press |
4 мм |
Operation method |
PLC Auto Control |
Метод за изхвърляне на бали |
Пускам |
Baler dimensions (L×W×З) |
4630×4357×2400mm |
Weight |
12000KG |
1. Тази странична изтласкваща преса приема хидравличната задвижваща система, разумен дизайн и компактна структура. Характеризира се с малък обем, леко тегло, малка инерция на движение, нисък шум, висока стабилност при движение, гъвкавост на работа и други силни страни.
2. With the incorporated hydraulic and electrical control, this machine is user-friendly and it is easy to realize the overload protection.
3. It is well adapted to different working conditions and has wide applicable range, like processing equipment in the metal recycling and processing unit, furnace charge processing machine in foundry, etc.
4. Our side push out baler is energy saving, convenient for installation, safe, reliable and efficient while working.
Brief Introduction of Baling Process
At first, the waste material for baling should be loaded into the compacting box manually or mechanically. The Lid cylinder starts to revolve the Lid to the right position for sealing the compacting box completely. Then the ejectors of the side cylinder and the main cylinder squeeze the waste materials into bale. Relying on the locking door cylinder, the locking door will be opened. The ejector of the main cylinder will push the bale out of the compacting box, finishing the baling process.
По желание Екстра
Хранене на конвейер
Маслен нагревател
Маслен охладител
Задвижване на дизелов двигател
Приложения
Non Ferrous Metals
Медни
Aluminum Cans
Алуминиеви прозорци
Scrap Aluminums
25 Liter Drums
Тенекиени консерви
Стоманени стърготини
Aluminum Chips
Aluminum Sheets
Aluminum And Copper Wires